| (Before
the use please earnestly reads the
instruction for use) |
| I.Outline
|
| 1. |
The
main purpose and the scope of application |
| |
KL4LM(A)
type lamp is portable lamp. And the
main application of various coal mines,
tunnels and underground construction
of the security lighting, lighting rescue. |
| 2. |
Product
performance standards |
| |
GB7957-2003
lamp overall safety performance
requirements and enterprise standards
Q/HDHHX 001-2006 KL4LM(A)-lamp. |
| 3. |
Product
explosion-proof pattern |
| |
ExsI |
| 4. |
The
use of environmental conditions |
| |
Temperature：-10～50℃；Relative
Humidity：≤90%。 |
| 5. |
Product
characteristics |
| |
KL4LM
(A) by the Electricity-head-lamp, cables
and lithium-ion battery composed of
Lamp Holder can be fixed on the helmets.
Source Lamp Holder 14 high-brightness
white LEDs used, and can be divided
into seven groups by an independent
source. Luminescence wick temperature
around 60 ° C, the surface of the sealing
temperature, it will not cause gas explosion.
LED longer life expectancy, lower consumption,
the battery capacity needs, not replace
the usage period lamp light.
Long battery life can be more than 500
charge-discharge cycle, the recharging
time of about eight hours, 11 hours
of continuous work for lamp; And without
memory, MF, security, clean, convenient
and efficient replacement batteries.
Battery with output short circuit protection
device, which can guarantee lamp within
15ms, cut in a short circuit, preventing
the occurrence of accidents, the use
of protection devices plots. |
| 6. |
Models
of composition and representational |
| |
 |
| II.Main
technical parameters |
| Weight |
490g
(full) |
intensity
of illumination 1х(begin) |
≥11h |
| cubage |
53*24*83
mm(battery) |
intensity
of illumination1х(11 hours later) |
≥800lx |
| capacity |
4Ah |
periodic
natural life of batteries |
≥700lx
|
| voltage |
3．7V |
The
time of short circuit safeguard |
≥500T |
| current |
0.35A |
Auxiliary
photosource Rated current |
≤15ms |
| length |
≥11h |
Auxiliary
illumination |
≥400lx |
|
| III、Product
structure and characteristic |
| |
 |
| |
 |
| IV、Use
method |
| 1. |
Charging |
| |
Before
use, please charging for the lamp. New
lithium-ion batteries used in the first
three, four times a complete recharging
cycle, so it can achieve the best performance. |
| |
（1）Use
portable charger
Charging for the lamp to be used products
compatible chargers. Charging that Shell
Lamp Holder cap hook inserted in the
charger charging rechargeable lock key
(anode), Lamp Holder will be rotated
180 degrees in a clockwise direction,
this time charging will lock in a fixed
Lamp Holder charger, rechargeable Lamp
Holder also very Cathode full access
to the charger. 220V power supply plugs
into the charger to the socket, press
the green button to switch aspect chargers,
chargers can see the red light and green
power light lit up at the same time
charging and recharging said, charging
the green light to be extinguished at
the end of charge. Then press the green
button, 7659, under the Electricity-head
with an anti-clockwise spin. Normal
recharging time of about eight hours.
Note: If on the battery charger decadent
tell-tale light shines time, indicated
the miner's lamp appears the breakdown
in the charging-up, should separate
the power source to stop charging, inspects
the miner's lamp whether charges the
contact not to be good or the battery
whether damages.
（2）rechargeable counters
Counter use rechargeable battery recharging
and the use of rechargeable supporting
counter products, please refer to the
use of rechargeable counter statement. |
| 2. |
Operating |
| |
Use
lamp, the lamp will be full of Lamp
Holder -- switching to the right side
rotating clockwise direction in place,
opening up power source brightened,
can be used. Closed lamp, switching
to an anti-clockwise rotation, the light
extinguished.
In the miner's lamp photosource entire
bright condition, continuously closes,
opens power source, will lighten group
of 7 diodesphotosource, will extinguish
another group of 7 diodes photosource,the
miner's lamp is at half bright energy
conservation condition. Continuously
closes when, operates the power source,
after shuts off should immediately again
open, if shuts off the time enough to
belong, will return to the initial state.
Note: When in the lamp holder red candle
shines, indicated the battery capacity
is insufficient, and automatically is
at half bright energy conservation condition;
Shines ten minutes after the red candle,
the miner's lamp photosource automatically
extinguishes |
| V、The
fault analysis with removes |
| |
Lamp
in the day-to-day use, the following
may be failure to take the following
general approach: |
| |
Breakdown
phenomenon |
Reason
analysis |
Processing
method |
After
turns on the power source the
photosource to be at half brightenergy
conservation condition but is
entire is bright
|
In
opens in the power source process
to appear touches breaks theswitch
phenomenon |
Switching
power supply two seconds after
the opening |
| Not
in a semi-state energy |
In
opens in the power source process
to appear touches breaks theswitch
phenomenon |
1
seconds to bring up the rear relations
should immediately re-opened |
While
the lack of time |
Continuous
relations, and open power, cut
off a long time |
Add—by
charging method; Replacement lamp |
Lights
flickered |
Switches
are not in place |
Will
switch knob to turn no date |
| Dark
lighting fat |
LED
life will soon end |
Replacement
lamp |
No
source |
Not
use before recharging; No open
Switch
|
Preceded
by charging for the use of lamp;
Open switch |
|
| VI、Maintenance
and repair |
| 1. |
This
product is exempts maintains the miner's
lamp, is sure not arbitrarily to open
with the replacement spare parts; When
firmly must open or the replacement
spare parts, must carries on by the
specially serviceman or in under this
company technical personnel's instruction,
must carry on in the ground. |
| 2. |
The
miner's lamp should use this company
necessary charge equipment charge; otherwise,
can because the charge parameter not
match the influence miner's lamp performance,
even causes the accident. |
| 3. |
The
miner's lamp should use this company
necessary charge equipment charge; otherwise,
can because the charge parameter not
match the influence miner's lamp performance,
even causes the accident. |
| 4. |
Lamp
shelved after they have read about five
times the normal charge-discharge cycle,
in order to achieve maximum battery
capacity. |
| 5. |
If
the lamp prolonged use, I would be grateful
if you could fully half of the state
after the place -- and a miner's lamp
for the regular monthly charge-discharge
cycles. If placed under low pressure
in the long term, there will be discharges,
battery performance dramatically for
the worse. |
| 6. |
Lamp
should not be near stoves and other
heat sources, the use of the lamp may
not go into the fire or scrapped End
address. |
| 7. |
This
product guarantees the nature time is
12 months. |
| VII、Transport,
storage |
| 1. |
Transport |
| |
The
miner's lamp strictly prohibits in the
transportation process being under the
fierce machinery impact and the insolation
exposes to the sun the rain to drench,
takes strict precautions against falls
throws, the tumbling, the heavy pressure. |
| 2. |
Storage |
| |
The
miner's lamp should store in the ambient
temperature 0 ~ 40 ℃, dry, to be clean
and good to ventilate, in the non- corrosive
medium warehouse, should be far away
the fire hazard and the heat source. |
| VIII、Operates
the box and the inspection |
| |
Physical
evidence should pass the inspection,
packing list and the use of brochures
are complete; With the number of crates
filled out single kind; Appearance is
intact checks, rotating lamp switch
can be turned on; Otherwise, the company
should immediately contact. |
| IX、Safety |
| |
No
charge for the lamp off, excessive discharge;
Short evokes is strictly forbidden lamp;
No impact on high-intensity lamp; The
prohibition of anti-rechargeable lamp;
Prohibit lamp into water or fire; Prohibit
unauthorized anatomy and transform lamp.
A lack of spare parts is strictly prohibited
down hole the lamp; Demolition is prohibited
in underground miner's lamp or replacement
parts; No lamp will be used for other
purposes, such as smoking, blasters;
Failure of the lamp can down hole use,
failure to use the process, there should
be immediately sent to the designated
officer Well maintenance.
Note: Please use brochures in strict
accordance with the requirements of
users use, maintenance and operation,
not free replacement parts, not arbitrary
setbacks, impact lamp. Lamp performance
will be affected, resulting in failure,
and even trigger insecurity incidents.
|
| X、Contact |
| |
Address：F8
Huang Cun Zhen Guicun industrial
Fuyuan road
Daxing district
Beijing
Postal code：102600
Tel：8610-61262751 61262752
Fax：8610-61262025
E-mail：kuangdeng@tonder.com.cn , tonder@sohu.com
Patent
number：ZL 2004 2 0003386.3
|
